USB 2.0 full speed device (USB-A/Mini cable included).Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo.

No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models.

For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters. We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. Interface select J2534: Tactrix Inc.- OperPort 2.The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Run pcmflash 1.2.0 software to identify and read DQ250 data Note: this VW DSG DQ250 gearbox is CAN protocol, you need to press the 120 ohm button. Godiag GT107 + PCMTuner Dongle + Tactrix Openport 2.0

The GODIAG GT107 analog ignition switch is in “Auto” mode if it is not pressed, and it is in “Manual” mode if it is pressed down (Note: Please select the corresponding mode in the software for data reading)ģ.

Connect Godiag GT105 ECU IMMO Prog AD and connect 12V 2A DC power supply.

Connect Godiag GT107 to the gearbox ECU DQ250, DQ200.

Read DQ200 OAM DSG gearbox (with subtitles).

Open pcmflash software to select the corresponding ECU model to perform identification and data reading.įor more info, check this post: Use Godiag GT107 Gearbox Adapter and Kess V2 to Read DQ200/DQ250 Data.Connect the PCMTuner Dongle to the computer.Connect kessv2 device, and press down the GT107’s switch to make it in “Manual” ignition mode.Connect Godiag ECU IMMO Prog AD and connect vehicle battery or 12v 3A power supply.Connect Godiag GT107 to gearbox ECU DQ250, DQ200.It’s compatible with PCMTuner, Kess V2, PCMFlash, KTMBench, Tactrix Openport 2.0 for DSG Gearbox ECU clone, diagnosis and repair. GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter. Here recommend Godiag GT107 ECU IMMO kit, Kess V2, PCMTuner, Tactrix Openport 2.0 and CG FC200, which have been tested and confirmed all work well for VAG by .uk engineer. Which tool can read and write DSG gearbox data for VAG DQ200/DQ250 (02E)?

Tactrix openport 2.0 volkswagen